Agilent README.txt README DesktopEE A050420130328 free download

File name README.txt README_DesktopEE_A050420130328.txt

=============================================== README.TXT Desktop EasyEXPERT Software =============================================== This document contains the following: * Introduction * System Requirements * Installation Instructions * Before Starting Desktop EasyEXPERT * Other Documents * Known Defects * Software Revision Introduction ============ The Desktop EasyEXPERT software provides the following additional advantages to the B1500A/B1505A, allowing you to minimize the amount of offline tasks performed on B1500A/B1505A and increase the working ratio for measurements. - Allows B1500A/B1505A to be controlled from an external computer via GPIB while online. - Allows test setup to be created on an external computer while offline. - Allows data analysis to be performed on an external computer while offline. Another feature is the unified measurement environment. You can use the Desktop EasyEXPERT to control the 4155B, 4156B, 4155C, or 4156C instead of the B1500A/B1505A. Then, there are some differences in the functions and operations compared with when the B1500A/B1505A is used. NOTE: Desktop EasyEXPERT supports most B1500A/B1505A EasyEXPERT functions. However, some functions are not supported on an external computers due to differences in hardware and so on. System Requirements =================== The following are the minimum requirement for executing Desktop EasyEXPERT. - Display: XGA 1024x768 (SXGA 1280x1024 recommended) - Hard disk drive: 1 GB free space in the C drive, 10 GB (30 GB recommended) free space in a drive for test setup/result data storage. - GPIB interface (for the Online execution mode): Agilent 82350B GPIB interface - Operating systems: - Windows XP Professional English Version or Japanese Version SP3 or later - Processor: Intel Celeron 2 GHz - Memory: 512 MByte DDR266 - Windows Vista Business English Version or Japanese Version SP2 or later - Processor: Vista certified PC - Memory: 1 GByte memory - Windows 7 Professional English Version or Japanese Version SP1 or later - Processor: Windows 7 certified PC - Memory: 2 GByte memory - Language: - English (US) or Japanese - Software: - Microsoft Windows Installer 3.1 or later (for Windows XP) - Microsoft .NET Framework Version 2.0 Redistributable Package (for Windows XP) - Microsoft .NET Framework 2.0 Service Pack 2 (for Windows XP) - Agilent IO Libraries Suite 16.2 (for the Online execution mode) NOTE: If your computer does not install all required software, install them in the above sequence. If your computer does not install a software, install it and the following software. For example, if your computer does not install Microsoft .NET Framework 2.0 Service Pack 2, install it, and Agilent IO Libraries (if you use the ONLINE mode) in this sequence. Prepare the Agilent IO Libraries software CD-ROM furnished with Ag